Read/Reply : 1712/1
  • burlington1
  • (1 posts)

 Hi, I have set my ip cam to ftp every 4 seconds and motion detection to sensitive and every three seconds but I am not getting motion alarms also I turned off the 4 sec ftp upload to see if it made a difference but it hasn't my alarm activations are shown below.

motion alarm 2015-08-28 17:35:36
motion alarm 2015-08-28 17:34:11
motion alarm 2015-08-28 17:33:21
motion alarm 2015-08-28 17:32:36
motion alarm 2015-08-28 17:25:04
motion alarm 2015-08-28 17:20:04
motion alarm 2015-08-28 17:08:21
motion alarm 2015-08-28 16:56:10
motion alarm 2015-08-28 16:53:11
motion alarm 2015-08-28 16:50:09
motion alarm 2015-08-28 16:49:07
motion alarm 2015-08-28 16:46:13
motion alarm 2015-08-28 16:43:29
motion alarm 2015-08-28 16:41:09
motion alarm 2015-08-28 16:40:23
motion alarm 2015-08-28 16:39:29
motion alarm 2015-08-28 16:38:15
motion alarm 2015-08-28 16:36:43
motion alarm 2015-08-28 16:32:34
motion alarm 2015-08-28 16:31:27
motion alarm 2015-08-28 16:30:01
motion alarm 2015-08-28 16:26:16
motion alarm 2015-08-28 16:24:05
 
as you can see there are many activations but I am not getting notifications and in the past i have been getting loads. I dont  want to site my camera at the front of my property until I am certain it works ok. 
 
Many Thanks
Nick

8/28/2015 9:59:06 AM

  • CameraFTPSupport
  • (125 posts)
Subject: Re:No motion alarm

If your IP camera is configured with motion detection, then you will receive an alert when your camera started uploading. Please note if your camera uploads continuously, then you will not receive any motion alerts.

If you log on to www.cameraftp.com, you can click on the email icon on the top-right corner of the web page to see all notification messages. If you install our mobile app, you will receive push notification messages ( which you can turn it off).

Please note motion detection is not always accurate. Based on our experience, most IP cameras will send a lot of false alarms. CameraFTP will not send all alarms. You cannot configure the motion detection interval on www.cameraftp.com right now, but we are adding this feature. In about a week, this feature will be launched.


Reply
9/18/2015 1:31:45 AM

Quickly Reply

Please logon and reply, Not DriveHQ Member?