**************************************************************************** PITCHING: You may have three different modes of "Usage" for pitching: Strict, Time, or Skip. Strict will just play your pitchers in the order that you list them under starters. Skip is like Strict, except that if you have a rest day then it will play your 1st starter earlier. Time proportionally doles out the starts to all of your starters on the roster based upon how many real life starts they have (it effectively chucks your starting rotation out the window). You must list a minimum of 4 starters, and even then, it's probably a better idea to go with 5 to prevent early burnout. If you use "Strict" or "Skip" (but *NOT* "Time"), you may use spot starters. Spot starters will start a certain percentage of the time (specified by you) in place of the regular starter. Since the "Time" usage doesn't really use the starting pitching profile, using spot starters won't help. Also note, you are limited to one spot starter per "regular" starter, and you must specify a percentage you wish to spot start them (otherwise, it's going to be 0%, and it's just as if you never specified a starter in the first place). People who have a durability rating for starters may start. People who have a durability rating for relievers may relieve. People who have durability ratings for both may do both. Note: In the regular season, players of any IP may be mentioned in the profile. There is no minimum IP for the regular season (but there is the 110% usage rule). For relievers, you should specify your closers vs left or right, setup men vs left or right, and your long & mopup starters. You may list up to 5 people for each of these spots, and you put players in multiple slots (although you can't list them twice in the same spot). Since we don't have minimum IP or batters faced requirements for mention in the profile during the regular season (other than the minimum 75 batters faced to be on the active roster), this could potentially lead to teams burning out large numbers of their players early who didn't have many IP to begin with. I ask that you try to pace your players so that this doesn't happen. **************************************************************************** Manager Profile for 1991 Albuquerque Maul Pitching Chart Usage mode: Strict Rotation size: 5 Next starter: 1 Starting Rotation Smoltz Bosio Aquino McCaskill Walk Spot Starters Brantley Bones Spot Pct 25 33 Mopup situations Gossage Clark Long relievers Shaw Gossage Setup vs LHB Innis Henneman Mason Setup vs RHB Henneman Innis Mason Closers vs LHB Olson Henneman Closers vs RHB Olson Henneman .................................................................................................... ***************************************************************************** Batting lineups: You will need to submit lineups for both LHP & RHP. Since this a non-DH league, the 9th batting slot will be reserved for the pitcher. ***************************************************************************** Manager Profile for 1991 Albuquerque Maul Depth Chart for 1991 Albuquerque Maul -- vs LHP Usage: Game by game Versus: Left DH: No Starting Lineup 1: Reed 2b 2: Fryman ss 3: Belle lf 4: Palmer 3b 5: Harper c 6: Jordan 1b 7: Munoz rf 8: Barnes cf 9: ************************************************************************* DEPTH CHART: For the depth chart, need to have at least 1 utility player for every position. You may also mention platoon players (those that come in when a reliever of the opposite handedness does) and defensive players (those that come in the late innings of close games). The way you can distribute playing time is by letting the utility players start a certain %age of the games. You can monitor this by either of two ways: Trackstarts or game by game. Trackstarts looks at the season as a whole, and tries to distribute playing time so that at the end of the season the playing time has been distributed %age-wise according to the diagram. Game by game randomly determines who starts the games without regards to past performances. Here a utility player with a 20% start rate has a 20% chance of starting that game. You can also have up to 5 pinch hitters for each side. With DMB 8.0e, there's PH vs LHP and PH vs RHP for each depth chart side. The DMB manual doesn't really explain why they have these redundant PH profiles, but I'd recommend just putting the same guys as PH vs RHP on both sides (like I have), and do the same for PH vs LHP. For the '91 season, there is no minimum PA that you need to be mentioned in the profile (besides the 35 PA minimum to be on the active roster). But remember that there is a 110% total plate apparance limit, and a 200% plate apperance limit for each side. Try not to burn people out early. ************************************************************************** ----- Catcher ----- --- First Base ---- --- Second Base --- --- Third Base ---- Start Harper Jordan Reed Palmer Plat Horn Fryman Def Santovenia Howard Litton Util1 Santovenia 0 Horn 0 Howard 0 Litton 0 Util2 Util3 Util4 Util5 ---- Shortstop ---- --- Left Field ---- -- Center Field --- --- Right Field --- Start Fryman Belle Barnes Munoz Plat Dunston Martinez,Da Boston Def Rodriguez Ortiz Munoz Util1 Dunston 0 Ortiz 0 Mitchell 0 Boston 0 Util2 Munoz 0 Util3 Util4 Util5 Designated Hitter ---- PH vs LHP ---- ---- PH vs RHP ---- Start Plat Def Util1 Mitchell Util2 Gwynn Util3 Util4 Util5 .................................................................................................... Manager Profile for 1991 Albuquerque Maul Depth Chart for 1991 Albuquerque Maul -- vs RHP Usage: Game by game Versus: Right DH: No Starting Lineup 1: Reed 2b 2: Dunston ss 3: Belle lf 4: Horn 1b 5: Harper c 6: Martinez,Da cf 7: Fryman 3b 8: Boston rf 9: ----- Catcher ----- --- First Base ---- --- Second Base --- --- Third Base ---- Start Harper Horn Reed Fryman Plat Jordan Palmer Def Santovenia Howard Litton Util1 Santovenia 0 Jordan 10 Howard 0 Litton 0 Util2 Util3 Util4 Util5 ---- Shortstop ---- --- Left Field ---- -- Center Field --- --- Right Field --- Start Dunston Belle Martinez,Da Boston Plat Fryman Barnes Munoz Def Rodriguez Ortiz Munoz Util1 Fryman 0 Ortiz 15 Gwynn 5 Mitchell 15 Util2 Barnes 0 Gwynn 10 Util3 Munoz 0 Util4 Util5 Designated Hitter ---- PH vs LHP ---- ---- PH vs RHP ---- Start Plat Def Util1 Mitchell Util2 Gwynn Util3 Util4 Util5 .................................................................................................... ***************************************************************************** TENDENCIES: You may tweak your managerial tendencies using 5 different levels: Least Frequent, Less Frequent, Neutral, More Frequent, Most Frequent. Setting everything to neutral will pretty must just use your team to its abilities (IE-if you have a guy who steals a lot of bases, he still will steal a lot of bases). These set the aggressiveness or passiveness of your team on certain issues. PH stands for "pinch hitter". ***************************************************************************** Manager Profile for 1991 Albuquerque Maul Manager Tendencies Bunting for a hit: Less frequent Sacrifice bunting: More frequent Squeeze bunting: Less frequent Hit and run: Neutral Stealing: Neutral Running: More frequent Taking pitches: Neutral PH for a pitcher: More frequent PH for a non-pitcher: Neutral PH for platoon player: Most frequent PH in a blowout: More frequent Pitching around: Neutral Intentional walk: Neutral Pickoff throws: More frequent Pitching out: More frequent Using relievers: More frequent Using closers: Most frequent Holding runners: Neutral Infield in: Neutral Guard lines: Neutral ************************************************************************* PLAYER SPECIFIC TENDENCIES: Due to the fact that for non-DMB owners this would turn into a large chore for both them and myself to enter, we will not be using player-specific tendencies. ************************************************************************* Player-specific tendencies (++ most, + more, = neutral, - less, -- least, N never) Player BHt BSc BSq H&R Stl Run Tak PHL PHR PHP Blw Ard IBB Pck Out Rel Cls .................................................................................................... ************************************************************************** PLAYING TIME LIMITS: You can't change the maximum # of at bats that a player can get, but you can toggle the switch for "can be PH for?". However, note that even if it is set for "Yes", it won't always happen. I can almost guarantee that Jeff Bagwell will never be pinch-hit for. **ALSO NOTE** You don't have to include the actual numbers below. DMB automatically does this. You only have to worry about this section if you want to change their status from being able to be pinch hit for to not being able to be pinch hit for. ********************************************************************** Manager Profile for 1991 Albuquerque Maul Playing Time Limits Maximum Atbats Player vsLHP vsRHP Starts Relief App Aquino 0 0 0 0 Barnes 85 74 0 0 Belle 0 0 0 0 Bones 0 0 11 0 Bosio 0 0 0 0 Boston 31 224 0 0 Brantley 0 0 5 1 Clark 0 0 2 5 Dunston 194 298 0 0 Fryman 0 0 0 0 Gossage 0 0 0 44 Gwynn 11 128 0 0 Harper 0 0 0 0 Henneman 0 0 0 0 Horn 0 0 0 0 Howard 80 156 0 0 Innis 0 0 0 0 Jordan 126 175 0 0 Litton 44 83 0 0 Martinez,Da 93 303 0 0 Mason 0 0 0 24 McCaskill 0 0 30 0 Mitchell 29 37 0 0 Munoz 44 94 0 0 Olson 0 0 0 0 Ortiz 48 35 0 0 Palmer 81 187 0 0 Reed 0 0 0 0 Rodriguez 8 29 0 0 Santovenia 49 47 0 0 Shaw 0 0 0 0 Smoltz 0 0 0 0 Walk 0 0 0 0